Resultats 1 - 12 sur un total de 367 réponses pour ged

Sentry 60A Brushless Speed Controller The Sentry series of BESCs have an inbuilt battery cell protector. By plugging the connector into the batterys charge port the BESC can ensure that the pack is balanced and that the pack never drops below a recomended level. This ensures your pack wont be over-discharged and destroy your battery. Its the best way to protect your expensive batteries. Considering in most cases your battery costs more than your BESC, its a wise investment to get a[...]

Canada custom has been great this year. Over $8k US$ from HK, Tawain & Japan tax/duty free. Always Canada Post with all clearance done by Canada customs, quick too with several hours process time even on weekends for EMS.Forgot one time, Fedex charged $16 brokerage plus $6 tax for a $50 pkg. Never use courier with their ridiculous brokerage fee for anything over $20CDN.

i need some little help, i dont know anymore what else i can do...i have a hk500gt. the problem is that the tail constantly breaks out when giving hard pitch. that's usually okay, because it's very hard work for the tail, but, i easily managed to get this to work on several hk450's with much much cheaper equipment (everything plastic, kds800, good servo and  though).this one has a full metal tail, carbon servo holder, spartan gyro, and a mks ds8910. basicly the best you can get... and[...]

Just discovered that i didn't have the "notify" button checked.  I used a 4.8 volt rx battery plugged in directly to the RX.  I would like to use one of these on a five cell LiPo, but I used a 3 cell for set-up.  It beeped as it was supposed to during set-up, but when I tried to start a motor there was no response of any kind.WaltNota bene: I have checked the "notify" button.

I have a Futaba 9C radio that I've been using in FM 72mhz mode with the Zippy 3C Lipo upgrade batter from HK. http://hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6955 This puts the Transmitter voltage over 12v when fully charged. Will there be any problem with the X8 transmitter module at this voltage? http://hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=8286 

QUOTE=W3FJW RonNewer ones are supposedly said to be charged ok at 5C, but I am a bit leery of this as I believe it's more a marketing thing. Personally, I wouldn't charge at more than 3C but I usually charge at 2C./QUOTEI dare not go beyond 2C rate.

QUOTE=BurnabyCredit cards charge 2.5-3% fees. HK is reminding you they're eating these charges. /QUOTENot really applicable on the credit cards processed through Cashoo. The processing fee for Cashoo is charged from the customer directly through the order.

So it won't damage the transmitter right?  Only the battery will be damaged at most.  

Low self discharge AA NiMH battery. Great for transmitters, fuel pumps, glow starters or other low discharge electronics that you want to use over several months or years without having to recharge. Low-Self-Discharge NiMH batteries are a new technology that prevent the battery from slowly losing it''s charge over time. In fact these LSD batteries can stay charged for over a year without losing more than 30% of their charge. Normal NiMH batteries would lose nearly 100% of their[...]

Keeps us updated on the progress. luv to see pics of this baby blinged up with lights and retracts. Watching realistic  takeoffs/landings with retracts is so cool.

Gday , i have just bought a foam floater jet , i have an older fm transmitter the floater jet responds to the servos bot not the motor , it just beeps at us and gitters , do i have a dud motor or have i done something else wrong batteries are fully charged , any help would be great ,, cheers Greg

Made from Porcher® UV proof paraglider ripstop nylon. The HobbyKing windsock is lightweight and resistant against prolonged wind, rain and sun damage. The lightweight material also means it''s able to indicate lighter winds, critical for R/C planes.   The windsock kit comes complete with pole and wire pre-installed.   Length: 800mm Inlet Diameter: 250mm     Porcher®, a registered trademark of Porcher Industries, France.