Resultats 1 - 12 sur un total de 1212 réponses pour turnigy

NEW PRODUCT: Turnigy 2200mAh 4S 35C Lipo Pack NEW PRODUCT: Turnigy 2200mAh 4S 35C Lipo Pack
The new number one in performance and price! The new Turnigy Lipoly packs deliver full capacity at the said C rate. You wont find a better deal in Lithium Polymer batteries anywhere! Spec. Minimum Capacity: 2200mAh Configuration: 4S1P / 14.8v / 4Cell Constant Discharge: 35C Peak Discharge (10sec): 45C Pack Weight: 257g Pack Size: 113 x 34 x 33mm Charge Plug: JST-XH Discharge plug: XT60
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=10384
NEW PRODUCT: Turnigy 2200mAh 3S 35C Lipo Pack NEW PRODUCT: Turnigy 2200mAh 3S 35C Lipo Pack
The new number one in performance and price! The new Turnigy Lipoly packs deliver full capacity at the said C rate. You wont find a better deal in Lithium Polymer batteries anywhere! Spec. Minimum Capacity: 2200mAh Configuration: 3S1P / 11.1v / 3Cell Constant Discharge: 35C Peak Discharge (10sec): 45C Pack Weight: 199g Pack Size: 113 x 34 x 25mm Charge Plug: JST-XH Discharge plug: XT60
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=10383
NEW PRODUCT: Turnigy 20A BRUSHED ESC (DE Warehouse) NEW PRODUCT: Turnigy 20A BRUSHED ESC (DE Warehouse)
Got an old brushed motor laying around and want to put it to good use? The Turnigy brushed ESC is an excellent speed controller with a linear throttle curve, Lipoly/NiMh ready and programmable braking. Spec. Cont Current: 20A Burst Current: 25A BEC Mode: 5v/1A Lipo Cells: 2-3 NiMH : 4-10 Weight: 17g Size: 45x21x8mm     FOR USE WITH BURSHED MOTORS ONLY. WILL NOT WORK WITH BRUSHLESS MOTORS
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=10374
NEW PRODUCT: TURNIGY Sentry 60amp Speed Controller (DE Warehouse) NEW PRODUCT: TURNIGY Sentry 60amp Speed Controller (DE Warehouse)
Sentry 60A Brushless Speed Controller The Sentry series of BESCs have an inbuilt battery cell protector. By plugging the connector into the batterys charge port the BESC can ensure that the pack is balanced and that the pack never drops below a recomended level. This ensures your pack wont be over-discharged and destroy your battery. Its the best way to protect your expensive batteries. Considering in most cases your battery costs more than your BESC, its a wise investment to get a[...]
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=10373
NEW PRODUCT: Turnigy 3000mAh 2S 30C Lipo Pack (USA Warehouse) NEW PRODUCT: Turnigy 3000mAh 2S 30C Lipo Pack (USA Warehouse)
The new number one in performance and price! The new Turnigy Lipoly packs deliver full capacity at the said C rate. You wont find a better deal in Lithium Polymer batteries anywhere! Spec. Minimum Capacity: 3000mAh Configuration: 2S1P / 7.4v / 2Cell Constant Discharge: 30C Peak Discharge (10sec): 40C Pack Weight: 189g Pack Size: 135 x 43 x 12mm Charge Plug: JST-XH Discharge plug: 4mm Bullet-connector  
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=10371
NEW PRODUCT: Turnigy 1300mAh 2S 20C Lipo Pack (DE Warehouse) NEW PRODUCT: Turnigy 1300mAh 2S 20C Lipo Pack (DE Warehouse)
The new number one in performance and price! The new Turnigy Lipoly packs deliver full capacity at the said C rate. You wont find a better deal in Lithium Polymer batteries anywhere! Spec. Minimum Capacity: 1300mAh Configuration: 2S1P / 7.4v / 2Cell Constant Discharge: 20C Peak Discharge (10sec): 30C Pack Weight: 82g Pack Size: 70 x 35 x 15mm Charge Plug: JST-XH  
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=10368
NEW PRODUCT: Turnigy 1800mAh 2S 30C Lipo Pack (DE Warehouse) NEW PRODUCT: Turnigy 1800mAh 2S 30C Lipo Pack (DE Warehouse)
The new number one in performance and price! The new Turnigy Lipoly packs deliver full capacity at the said C rate. You wont find a better deal in Lithium Polymer batteries anywhere! Spec. Minimum Capacity: 1800mAh Configuration: 2S1P / 7.4v / 2Cell Constant Discharge: 30C Peak Discharge (10sec): 40C Pack Weight: 115g Pack Size: 104 x 33 x 15mm Charge Plug: JST-XH Discharge Plug: 3.5mm Bullet-connector 
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=10362
Turnigy  - R/C Electronic Switch : crazy4volvo Turnigy - R/C Electronic Switch : crazy4volvo
Hi,according to the wiring diagramhttp://www.hobbycity.com/hobbycity/store/catalog/e-switch.jpgthis switch works on the "high side", so most probably you can't use it to ground the coil wire. I don't know the Zenoah ignition circuit, but if there is something like a CDI module similar to those found in bike engines, you should switch off the power supply of the CDI module instead.In one of the posts here I read that if the brown switch wire is connected to the common ground, the other wire can[...]
http://www.hobbyking.com/hobbycity/forum/forum_posts.asp?TID=4609
My FPV Setup : Ian W My FPV Setup : Ian W
I've now built my portable ground station that houses all the gear neatly and all is working well.  The station runs on a 3S Turnigy 3000mah lipo.  The DVR  runs off a Turnigy 3A switching reg at 5V.   The station carries the patch antenna and all leads are permanently connected. No need to discconnect anything after flight.  Will post a pic soon.   I replaced the vid rx which has had a problem so everything is ready for maiden FPV.   I traced a fault in[...]
http://www.hobbyking.com/hobbycity/forum/forum_posts.asp?TID=3821
NEW PRODUCT: Turnigy Type A Beech wood 22x13 propeller NEW PRODUCT: Turnigy Type A Beech wood 22x13 propeller
Light weight yet strong Beech wood prop is beautifully crafted and laminated.
http://www.hobbyking.com/hobbycity/store/uh_viewItem.asp?idProduct=10421
Turnigy Equivalent for Scorpion 2215-18 : Trojan Turnigy Equivalent for Scorpion 2215-18 : Trojan
Thanks everyone for your input. I'll be putting this motor on a foamy that I got for $10.00. I have had a couple of people at my flying field recommend the Turnigy's.
http://www.hobbyking.com/hobbycity/forum/forum_posts.asp?TID=4618
questions belt CP : lyclyc questions belt CP : lyclyc
2200~2300mah lipo are suitable for you... got turnigy, zippy, rhino...take 20C and above discharge should be good for you..no training gear found...
http://www.hobbyking.com/hobbycity/forum/forum_posts.asp?TID=4528